The value for the authentication broker identity, which
you provided to create authentication broker principal
on the root broker system.
This is the value for the --prplname option of the
addprpl command.
See “Creating authentication broker accounts on root
broker system” on page 34.
identity
The value for the authentication broker password,
which you provided to create authentication broker
principal on the root broker system.
This is the value for the --password option of the
addprpl command.
See “Creating authentication broker accounts on root
broker system” on page 34.
password
The value for the authentication broker password for
Administrator account on the node. This password
must be at least five characters.
broker_admin_password
3
For each node in the cluster, create the input file for the encrypted file.
The installer presents the format of the input file for the encrypted file when
you proceed to configure the Authentication Service using encrypted file.
For example, the input file for authentication broker on galaxy resembles:
[setuptrust]
broker=venus.symantecexample.com
hash=758a33dbd6fae751630058ace3dedb54e562fe98
securitylevel=high
[configab]
identity=galaxy
password=password
root_domain=vx:root@venus.symantecexample.com
root_broker=venus.symantecexample.com:2821
broker_admin_password=ab_admin_password
start_broker=false
enable_pbx=false
4
Back up these input files that you created for the authentication broker on
each node in the cluster.
Preparing to install VCS
Preparing to configure the clusters in secure mode
36
To Next Page
Loading...