installvcs [ system1 system2... ] [ options ]
Table 4-2 lists the installvcs command options.
Table 4-2
installvcs options
DescriptionOption and Syntax
Configure VCS after using -installonly option to install
VCS.
See “Configuring VCS using configure option” on page 59.
-configure
See the -responsefile and the -encrypt options.-enckeyfile
encryption_key_file
Encrypt password using the encryption key that is provided
with the -enckeyfile option so that the encrypted password
can be stored in response files.
-encrypt password
Specifies the location of a file that contains the system names
for the installer.
-hostfile
Install product RPMs on systems without configuring VCS.
See “Installing VCS using installonly option” on page 59.
-installonly
Display VCS packages in correct installation order. Output
can be used to create scripts for command line installs, or for
installations over a network. See the requiredpkgs option.
-installpkgs
Specifies a key file for SSH. The option passes -i
ssh_key_file with each SSH invocation.
-keyfile
ssh_key_file
Register or update product licenses on the specified systems.
Useful for replacing demo license.
-license
Specifies that log_path, not /opt/VRTS/install/logs, is the
location where installvcs log files, summary file, and response
file are saved.
-logpath log_path
Specifies that additional product RPMs such as VxVM and
VxFS need not be installed.
Note: VCS product upgrades in the future can be simplified
if you do not install additional product RPMs.
-noextrapkgs
Install product RPMs on systems without licensing or
configuration. License-based features or variants are not
installed when using this option.
-nolic
57Installing and configuring VCS
About the VCS installation program
To Next Page
Loading...