Symbol LS1203 Quick Start Guide

SYMBOL LS1203
BLACK
PANTONE 285
http://www.motorola.com/ls1203
STEP 2 -CONNECT CABLE TO A HOST
STEP 1 - ATTACH CABLE TO SCANNER
Quick Start Guide
See Product Reference Guide for detailed information
RS-232
USB Keyboard Wedge
Attach Cable
Remove Cable (to change interface)
STEP 3 - SET UP INTERFACE (Scan Host Bar Codes)
STANDARD RS-232
OPOS/JPOS
IBM AT Notebook
IBM PC/AT and IBM PC COMPATIBLE
HID KEYBOARD EMULATION
IBM HAND-HELD USB
Important: Out of box, Keyboard Wedge and USB interfaces require no bar code scan setup. Bar codes are provided for complex programming or interface changes.
ADD AN ENTER KEY (CARRIAGE RETURN/LINE FEED)
Adding an Enter Key after scanned data; Scan all THREE bar codes in numerical order.
SCAN OPTIONS <DATA><SUFFIX> ENTER
RS-232
Keyboard Wedge
USB
Note: Power Supply Optional
NOTE: Cables may vary depending on configuration.
Or
ADD A TAB KEY
To add a Tab key after scanned data, scan all THREE Enter key bar codes above in numerical order then scan all FIVE bar codes below in numerical order.
SCAN SUFFIX
7
0
0
9
1 2
3 4
5
1 2 3
Scan ONE of the bar codes below Scan ONE of the bar codes below Scan ONE of the bar codes below

Symbol LS1203 Specifications

General

Scan Pattern	Single line
Scan Technology	Laser
Connectivity	Wired
Decode Capability	1D
Weight	4.3 oz./122 g
Light Source	650 nm visible laser diode
Scan Rate	100 scans per second
Storage Temperature	-40° to 158° F / -40° to 70° C
Interface	USB, RS-232, Keyboard Wedge
Drop Specification	Withstands multiple 5 ft./1.5 m drops to concrete
Operating Temperature	32° to 104° F / 0° to 40° C
Humidity	5% to 95% (non-condensing)
Supported Barcodes	UPC/EAN, Code 39, Code 128