To Next PageTo Next Page
Need help?Do you have a question about the Symcod LBC-02/IP and is the answer not in the manual?
General| Serial Ports | 2 x RS-232 |
|---|---|
| Power Supply | 12V DC |
| Operating Temperature | 0°C to 50°C |
| Touch Screen | Resistive |
| Ethernet | 10/100 Base-T |
| USB Ports | 4 x USB 2.0 |
Defines the default function key assignments (F1-F5, TAB, ESC) for the LBC-02/IP terminal emulation.
Lists special sequences for keypad operations like BOOT mode, TCP/IP reset, IP configuration, and cursor positioning.
Details sequences for configuring barcode suffixes (ENTER, TAB, NOTHING) and prefix values.
Explains sequences for controlling TTL outputs (ON/OFF) and setting timed output durations.
Covers settings for barcode scanning, keyboard enablement, and specific keyboard mappings (UNIX, AS/400).
Includes options for time/date display, duplex modes, CapsLock, cursor positioning, and watchdog configuration.
Specifies the command to clear the terminal screen from any position.
Details how to define custom characters for function keys (M1-M5, ESC, ENTER) and default/tab key behavior.
Explains sequences for managing TTL input states (DESABLE, ENABLE, REQUEST Status) and their return values.
Covers commands to control the LED indicator and emit sound, including barcode BIP validation.
Provides sequences for setting the current time and date on the terminal.
Describes how the terminal displays and refreshes the current time and date.
Steps for configuring terminal IP, Net Mask, Host IP, and login string using BoardConfig software.
Details support for AS/400 Workstation ID with specific software and device versions.
Instructions for establishing a connection with the LBC-02/IP in PASSIVE mode using port 1024.
Lists operations available in terminal mode: return to BOOT mode, reset TCP connection, view IP config, and change cursor position.
