23
Ring Barcode Scanner
The setting prefix and suffix is divided into two parts,displayable
characters and controlled characters
1st Part：Displayable characters
Step1：Scanning following setting code“Add Prefix”or“Add
Suffix”
Step2 ：Finding the character which you need to add as prefix
or suffix in appendix B,and scanning the barcode corresponding
to the character.
Character Set 0
Character Set 1
Add Prefix
Add Suffix
Step1：Finding the character which you need to add as prefix
or suffix in appendix A,and scanning the barcode corresponding
to the character set.
Prefix/Suffix Setting
2nd Part：Controlled Characters
To Next Page
Loading...
