19
2.4G/Bluetooth Wireless Barcode Scanner
Operating Mode
Storage Mode
By scan “Total amount of stored barcode” barcode, to check the
total amount of scanned barcodes in storage:
Total amount of stored barcode
If the internal storage is full, the scanner will emit three low-
frequency short tones to alarm.
Normal Mode
In normal mode, the scans are uploaded directly to computer via
USB cable or WIFI dongle. If succeeds, barcode scannner will
make a low-frequency short tone. If it fails, there willl be three low
frequency short tones to alarm. In normal mode, if fails,
the data will be lost. You can scan below:
If the transfer range is beyond Bluetooth wireless transfer range
storage mode is suggested, in which scans are stored in internal
storage after being scanned.
In storage mode, if a barcode is scanned and the scanner will
make a short tone and scans are automatically stored in
scanner's internal storage.
To Next Page
Loading...
