Symmetricom SSU-2000e Technical Reference

12713140-003-2 Revision E.01 – January 2007 SSU-2000e Technical Reference 71
Chapter 2 TL1 Reference
Retrieve IP Parameters
Retrieve IP Parameters
This command returns the current Internet Protocol settings for the unit.
Syntax
RTRV-PRMTR-IP:[tid]::ctag;
Response Format
^^^"aaa.aaa.aaa.aaa,mmm.mmm.mmm.mmm,ggg.ggg.ggg.ggg"<cr lf>
where:
 aaa.aaa.aaa.aaa = IP address of the unit
 mmm.mmm.mmm.mmm = IP mask of the unit
 ggg.ggg.ggg.ggg = IP gateway of the unit
Related Commands
Set IP Parameters, on page 135

Symmetricom SSU-2000e Specifications

General

Brand	Symmetricom
Model	SSU-2000e
Category	Power Supply
Language	English