Need help?Do you have a question about the Symmetricom SSU-2000 and is the answer not in the manual?
General| Brand | Symmetricom |
|---|---|
| Model | SSU-2000 |
| Category | Power Supply |
| Language | English |
Describes the manual's purpose, scope, and intended audience for product information.
Details the organization of the document, including chapters and appendixes.
Explains formatting, typographical, and abbreviation conventions used throughout the manual.
Highlights critical safety, operational, and advisory information presented in the guide.
Introduces the SSU-2000 Synchronization Supply Unit and its industry role.
Describes the SSU-2000's main sections and operational flow.
Details the physical components of a typical SSU-2000 installation.
Summarizes methods for controlling the SSU-2000 and available software features.
Provides procedures for carefully unpacking and checking the SSU-2000 equipment.
Details critical grounding and power connection procedures for the SSU-2000.
Guides the user through establishing I/O, communication, and alarm connections.
Provides precautions and procedures for safely installing, exchanging, or removing modules.
Details the procedure for powering on the SSU-2000 system and expected LED indications.
Explains methods for connecting to the SSU-2000 via serial or Ethernet.
Provides general instructions for configuring the SSU-2000 after installation.
Describes how to verify the system's operational status by checking alarms.
Lists all checks that must be completed before performing commissioning tests.
Outlines operational tests to verify correct installation and configuration.
Explains how to interpret and manage system alarms for troubleshooting.
Describes procedures for replacing field replaceable units (FRUs).
Provides guidance on diagnosing and resolving common system faults.
Provides reference information for the Stratum 2E Clock module.
Provides reference information for the Stratum 3E Clock module.
Provides reference information for the Communications module.
Describes the E1 Input modules and their functionality.
Describes the DS1 Input modules and their functionality.
Details the GPS Input module's function, configuration, and specifications.
Lists and describes various input adapter panels for signal connectivity.
Provides reference data for the E1 Output module.
Provides reference data for the DS1 Output module.
Provides reference data for the Composite Clock Output module.
Details the RS-422 Output module's functionality and specifications.
Provides information on the installation and operation of the DS1 Line Retiming Unit.
Describes how to configure the SSU-2000 for time synchronization generation.
Explains the setup for SSU-2000 as a PRS for network timing.
Details the configuration for using the SSU-2000 solely for monitoring input signals.
Describes how to configure the SSU-2000 for remote phase synchronization.
Describes the types of alarms and their corresponding corrective actions.
Lists and describes the various events generated by the SSU-2000 system.
Summarizes the languages used for controlling the SSU-2000.
Provides detailed information on TL1 commands, conventions, and responses.
Describes ICS command conventions, prompts, and syntax.
Explains the Network Time Protocol functionality and configuration.
Details the SNMP versions supported and their configuration.
Provides contact details and procedures for ordering accessories.
Lists and describes various antenna kits and associated part numbers.
Provides procedures for installing GPS antennas and related components.
Explains the signals and connectors on the SSU-2000 rear panel.
Details the power and ground connections and pinouts.
Describes the communication interfaces and their pinouts.
Describes the alarm closure connectors and their signal names.
Lists settings and factory defaults for the SSU-2000 Communications Module.
Lists settings and factory defaults for the Clock module.
Lists factory default settings and ranges for DS1 and E1 Input modules.
Provides configuration settings for the GPS Input Module.
Lists settings and factory defaults for DS1 and E1 Output modules.
Lists configuration settings for the 2048 kHz Output Module.
Lists factory default settings and ranges for E1/2048 kHz Output modules.
Lists configuration settings for the Composite Clock Output Module.
Lists factory default settings and ranges for RS-422 Output modules.
Provides configuration settings for the PQL table.
Details general specifications and operating conditions for the SSU-2000 shelf.
Lists system-level specifications for the SDU-2000 expansion shelf.
To Next Page
