Interactive Command Set
328 SSU-2000 User’s Guide 12713020-002-2 Revision D – April 2004
CONFIG
Use this command to view the current hardware configuration of the SSU-2000.
Level 0 Not applicable
Level 1
CONFIG [xAy]
If you do not provide parameters, the current hardware inventory
displays with each slot on one line (concise information). If you
provide parameters, more detailed hardware and software
inventory management information displays in multiple lines
(detailed information).
Concise information: Concise Information includes slot location,
module name, item number, hardware revision number,
manufacture date, and serial number. If shelf address is 1- 5, it
displays shelf description and shelf part number (254xxxxx-xxx-x).
Detailed information: Includes all the concise information
described above. It also includes configured revisions (if supported
by module), in-service time (if supported by module), and the
feature list (if supported by module, for example: the COMM
Module returns NTP and SNMP features).
If the xAy is 1-5, the shelf information is displayed. The description
and shelf part number are listed in Table B-8.
CONFIG SW
This command displays the software part number (141xxxxx-xxx-x)
and revision number.
CONFIG ADAPTER
Table B-8. Shelf Configuration Information
Shelf Description Shelf Part Number
1 SSU-2000 25413020-000-0
2-5 SSU-2000 25413140-000-0, 25413140-001-0
1 SDU-2000 25413023-000-0
2-5 SDU-2000e 25413141-000-0, 25413141-001-0
To Next Page
Loading...
Need help?
General
