12713020-002-2 Revision D – April 2004 SSU-2000 User’s Guide 21
How to Use This Guide
Structure of This Guide
Structure of This Guide
This guide contains the following sections and appendixes:
Chapter, Title Description
Chapter 1, Product Overview Provides an overview of the product, describes the major
hardware and software features, and lists the system
specifications.
Chapter 2, Installing the
SSU-2000
Contains procedures for unpacking and installing the product,
and for powering up the unit.
Chapter 3, Provisioning and
Operating the SSU-2000
Describes
the ICS and TL1 commands required to provision the
SSU-2000 after installing the unit.
Chapter 4, Commissioning Provides checklist-based commissioning tests that should be
performed after completing turn-up and software configuration to
ensure the system is ready for normal operation.
Chapter 5, Maintenance and
Troubleshooting
Contains preventive and corrective maintenance, and
troubleshooting procedures for the product.
Chapter 6, Clock Module
Reference Data
Provides detailed information on the Communications module
and the various Clock modules available for use in the
SSU-2000.
Chapter 7, Input Module
Reference Data
Contains detailed information on the Input modules available for
use in the SSU-2000.
Chapter 8, Output Module
Reference Data
Describes the Output modules available for use in the SSU-2000
and in the SDU-2000.
Chapter 9, Hardware
Configuration Guide
Describes how to configure the SSU-2000 in several modes, and
lists part number for shelves, modules, and accessories.
Appendix A, Alarms and Events Lists the alarms and events that appear on the console and
provides basic indications of the source of the alarm.
Appendix B, Communications
Protocol
Describes how to use the CRAFT software interface with the
TimeProvider.
Appendix C, Antennas Provides procedures for installing a GPS antenna and
connecting it to the SSU-2000.
Appendix D, Connector Pinouts Lists the pinout of the connectors on the rear panel of the
SSU-2000.
Appendix E, Default Settings Includes a list of the factory default values for hardware and
software parameters.
Appendix F, Specifications Lists the specifications for the SSU-2000
To Next Page
Loading...
Need help?
General
