12713020-002-2 Revision D – April 2004 SSU-2000 User’s Guide 421
1
1
Appendix E Default Settings
This appendix contains tables that list the factory default settings for the SSU-2000.
If you make any changes to the factory default settings, record them in Table E-11
for future reference. Use the “SETUP” command to verify settings.
In This Appendix
Communications Module Default Settings
Stratum 2E and 3E Clock Module Default Settings
DS1 and E1 Input Module Default Settings
GPS Input Module Default Settings
DS1 and E1 Output Module Default Settings
2048 kHz Output Module Default Settings
E1/2048 kHz Output Module Default Settings
Composite Clock Output Module Default Settings
RS-422 Output Module Default Settings
Priority Quality Level (PQL) Table Default Settings
User Changes to Factory Defaults
To Next Page
Loading...
Need help?
General
