12713020-002-2 Revision D – April 2004 SSU-2000 User’s Guide 327
Interactive Command Set
Use this option to change the setting for a specified
communications port. The setup changes are stored in non-volatile
RAM.
Options are:
MODE {ASCII|TL1}
Sets the current mode to either ASCII (interactive) or
TL1.
TIMEOUT Sets the communications port automatic
logout-time-out value. Values are in seconds. NEVER
disables automatic logout.
Level 3 Same as Level 2 operation
Level 4 Same as Level 3 operation
Remarks None
Related None
Restrictions BAUD, ECHO, AND EOL are only applicable to EIA-232. The
communications port must be specified to set any parameter.
To Next Page
Loading...
Need help?
General
