Synco Xtalk XPro - Page 8

6www.syncoaudio.com
4.2 Combine Into One Group
1) Only keep one Master, and set the other headsets as Level 1 if needed. (See 2. Master/
Level 1 Settings).
2)Pair all headsets and restart (see 3. Pairing/Unpairing).
1)Keep 1 Master, set 4 Level 1 (See 2. Master/Level 1 Settings).
2)Pair headsets in sequence: Pair Master with Level 1 (See 3. Pairing/Unpairing).
3)Restart all headsets after successfully connecting(Power on sequence: Master → Level 1).
EG. Combine 2 groups(A 2-Person Group and A 3-Person Group) into 1 group
2-Person Group3-Person Group
Master
＋
Level 1
Master
Level 1
5-Person Group