20
PROGRAMMING
If the machine has been set to universal program mode, you will be able to change the “Le” and “Right”
program, seng the preinfusion me and water count for each. Each brew group will use these programs.
This is the default mode.
If the machine has been set to individual program mode, there will be a separate page for the le and right
programs on each brew group. This allows the groups to use dierent programs. This mode can be selected
in the 2nd level menu. (See page 23)
Line 2 indicates program 1, acvated by a le shi of the group top handle and program 2, acvated by a
right shi of the group top handle.
Line 3 indicates the adjustable preinfusion values in seconds for the le and right programs. If the value is
adjusted to 0 seconds, the preinfusion stage will be skipped.
Line 4 indicates the adjustable ow count values. There are about 4.5 counts per milliliter of water dispensed.
Some of this dispensed water is absorbed and retained by the coee puck, but generally, if you add 9 counts,
you should receive 2 addional mL of water.
To cycle to the next display screen, press the down buon.
Menu Level 1: Programs
Menu: Steam Tank and Hot Water Tap
Please see next page for details.
To Next Page
Loading...
Need help?
General
