To Next PageTo Next Page
Need help?Do you have a question about the Synesso MVP Hydra and is the answer not in the manual?
General| Pump Type | Rotary |
|---|---|
| PID Temperature Control | Yes |
| Pre-infusion | Yes |
| Volumetric Dosing | Yes |
| Boiler Material | Stainless Steel |
| Pressure Profiling | Yes |
| Material | Stainless Steel |
| Water Reservoir | Direct plumb only |
Essential safety guidelines for operating and maintaining the Synesso espresso machine.
Step-by-step instructions for safely releasing pressure from the steam tank.
Instructions for safely releasing pressure from the brew tanks before servicing.
Details the terms and conditions of the machine's limited warranty period and coverage.
Specifies required water parameters (TDS, hardness, pH) to maintain machine warranty.
Outlines prerequisites for machine installation to ensure warranty validity.
Instructions for preparing the installation site, including counter space and clearances.
Emphasizes adherence to codes and the necessity of water treatment for warranty.
Details voltage, frequency, amp draws for models, and standard wire color codes.
Notes specific electrical needs and plumbing color coding for MVP Hydra models.
Step-by-step guide for the initial power-on, filling, and bleeding of the machine.
Instructions on how to set the correct pump pressure to 9 Bar.
Lists and explains error codes related to the brew system for troubleshooting.
How to access and view recorded error codes and their timestamps.
Diagnosing and resolving issues like slow shots, fast shots, and poor crema.
Diagnosing problems related to brew pressure gauge readings and pump operation.
Explaining and troubleshooting fluctuations in brew water temperature readings.
Diagnosing and resolving problems with the steam wand and steam tank operation.
