Synesso MVP Hydra


24
PROGRAMMING
Thereare3levelsofmenusatechniciancanaccessthroughthewiredcontroller:
Menulevel1describedonpages19‐23containsengsrelevanttotheday‐to‐dayoperaonofthemachine.
Menulevel2maybereachedfromlevel1andcontainssengsrelevantto
techniciansandmachineowners.
To access menu level 2, first press the home buon to return to the temperature overview screen. Next,
press and hold the home buon. Press and release the 4th line buon, then release the home buon. 
Menu Level 2: Lockout
Thisisthefirstscreenofthe2ndlevelofmenus,therightholdsavelockoutscreen.
Line3canpreventtheaccidentaluseofsavemode.Whenthissengis“locked”,holdingrightonthegroup
headswillnotentersavemode,insteadtheshotmerswillblinkarederrorlightattheoperator.
Tocycletothenextdisplayscreen,pressthedownbuon.
Menu Level 2: Programs
Onthisscreen,youcanacvateordeacvateprogramstorageposions2through6.Program#1cannotbe
deacvated.Shiingrightwhilenotbrewingashotwillcyclethroughanyprogramsavelocaonscurrently
acveinnumericalorder.(1‐>2‐>5‐>1…asshown.)Thissengisappliedtoallgroups.
Tocycletothenextdisplayscreen,pressthedownbuon.