EasyManua.ls Logo

Synology DiskStation DS1817+ - Synology DiskStation at a Glance

Synology DiskStation DS1817+
23 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
4
Chapter 1: Before You Start
Synology DiskStation at a Glance
No. Article Name Location Description
1
Status Indicator
Front
Displays the status of the system. For more information, see "Appendix B:
LED Indicator Table".
2
Alert Indicator
Displays warnings regarding fan or temperature. For more information, see
"Appendix B: LED Indicator Table".
3
Power Button
1. Press to power on the DiskStation.
2. To power off the DiskStation, press and hold until you hear a beep sound
and the Power LED starts blinking.
4
LAN Indicator
Displays the status of the network connection. For more information, see
"Appendix B: LED Indicator Table".
5
Drive Status Indicator
Displays the status of the installed drive. For more information, see "Appendix
B: LED Indicator Table".
6
Drive Tray Install drives (hard disk drives or solid state drives) here.
7
Drive Tray Lock Lock or unlock drive trays.
8
USB 3.0 Port
Connect external hard drives, USB printers, or other USB devices to the
DiskStation here.
9
Power Port
Back
Connect the AC power cord here.
10
Fan
Disposes of excess heat and cools the system. If the fan malfunctions, the
DiskStation will emit a beeping sound.
11
PCI Express
Expansion Slot
Supports one PCIe x8 slot (x4 link) add-on card.
12
Kensington
Security Slot
Attach a Kensington security lock here.
13
eSATA Port 1
Connect external SATA drive or Synology Expansion Unit
1
to the DiskStation
here.
14
LAN Port Connect network cables here.
15
RESET Button
1. Press and hold until you hear a beep sound to restore the default IP
address, DNS server, and password for the
admin
account.
2. Press and hold until you hear a beep sound, then press and hold again
until you hear three beep sounds to return the DiskStation to “Not Installed”
status so that DiskStation Manager (DSM) can be reinstalled.
16
USB 3.0 Port
Connect external hard drives, USB printers, or other USB devices to the
DiskStation here.
17
eSATA Port 2
Connect external SATA drive or Synology Expansion Unit
1
to the DiskStation
here.
1
For more information about Synology Expansion Unit supported by your DiskStation, please visit
www.synology.com
.

Related product manuals