10
Chapter 2: Set up Your Synology Router
6
Set up the operation mode. When choosing the
Wireless Router
mode, you can also enable
External access
to SRM
so that only external access via the HTTP(S) port (e.g. 8000/8001) can reach SRM.
7
Choose an Internet connection type:
•
PPPoE
: Choose this option if you have obtained PPPoE credentials from the ISP.
•
Manual IP
: Choose this option if you have obtained an available IP address for use.
•
Auto IP
: Choose this option if you rely on an ISP modem for automatic IP assignment.
To Next Page
Loading...