2 QSG f201 version 2.1
Firestar™ f201 laser & Flyer 3D System Quick Start Guide
2. Locate the shipping components for the Marking Head at the bottom of the box under the Marking
Head.
2.1 Remove the marking head from the box.
2.2 Retrieve the components from the bottom
of the box.
3.1 Remove and retain the marking head foam.
3. Don’t forget to save all shipping container(s) and inserts for use when shipping or relocating either
the laser or the marking head to another location. Packaging is specially designed to protect your laser.
To Next Page
Loading...
