4
XW-100 SAMPLE PROCESSING
Sample Preparation
The blood sample must:
• Be collected in an EDTA-K2 or K3 (purple top) vacuum tube as shown on the instrument's display screen.
• Be run within 8 hours of having been drawn, if stored at room temperature, or within 36 hours if
refrigerated.
• Required sample volume: > 1 mL
Instrument Preparation
• If the screen displays "QC Required," refer to the Quality Control section of this Quick Guide.
• If the screen displays "General Care Required," refer to the General Care section of this Quick Guide.
(Continued on the next page)
To Next Page
Loading...
