SYSMEX KX-21 - Page 12

ii Sysmex KX-21 Operator’s Manual -- Revised January 2000
CHAPTER 3: DISPLAY AND PROCESSING OF ANALYSIS RESULTS
1. INTRODUCTION.................................................................3-1
2. PROCESSING LATEST SAMPLES...........................................3-2
2.1 Display of Analysis Result ................................................3-2
2.2 Manual Discrimination ....................................................3-6
2.3 Printing..................................................................... 3-10
2.4 Print Paper Feed .......................................................... 3-10
3. PROCESSING STORED DATA.............................................. 3-11
3.1 Executing and Quitting Stored Data Processing Program........... 3-11
3.2 Stored Data Screen ....................................................... 3-12
3.3 Deletion .................................................................... 3-15
3.4 Printing..................................................................... 3-16
3.5 HC Output (Option) ...................................................... 3-16
3.6 Correcting a Sample Number ........................................... 3-17
CHAPTER 4: MAINTENANCE AND SUPPLIES REPLACEMENT
1. INTRODUCTION.................................................................4-1
2. KX-21 MAINTENANCE CHECKLIST .......................................4-2
3 DAILY MAINTENANCE AND PROCEDURE .............................4-4
3.1 Clean TD Chamber and Diluted Sample Line (Shutdown) ...........4-4
3.2 Check Trap Chamber Level and Discard................................4-6
4. WEEKLY MAINTENANCE AND PROCEDURE ..........................4-7
4.1 Clean SRV Tray ............................................................4-7
5. MONTHLY MAINTENANCE AND PROCEDURE........................4-9
5.1 Clean Waste Chamber (Rinse Sequence)................................4-9
5.2 Clean Transducer (Rinse Sequence) ....................................4-12
6. EVERY 3-MONTH MAINTENANCE AND PROCEDURE............. 4-16
6.1 Clean Sample Rotor Valve (SRV).......................................4-16
6.2 Reset SRV Cycle Counter ...............................................4-22
7. AS-NEEDED MAINTENANCE AND PROCEDURE.................... 4-24
7.1 Auto Rinse..................................................................4-24
7.2 Clean Rinse Cup ...........................................................4-26
7.3 Clean WBC/RBC Transducer Aperture ................................4-28
7.4 Replace Waste Tank.......................................................4-32
8. SUPPLIES REPLACEMENT ................................................. 4-33
8.1 Replenish Reagent.........................................................4-33
8.2 Replace Fuse ...............................................................4-36
8.3 Replace Printer Paper .....................................................4-37
8.4 Supplies List................................................................4-40
9. CONFIRMATION OF CYCLE NUMBER.................................. 4-41
9.1 Operation Procedure ..................................................... 4-41