MAINTENANCE AND SUPPLIES REPLACEMENT
Sysmex KX-21 Operator’s Manual -- Revised October 1998 4-35
(5) When reagent replenishment is over, follow the instruction on the screen and press [1]
key to select "1: Asp. Reag." Reagent is automatically aspirated, and then background
check is performed. The check is made here to see that background error has not
occurred.
(6) Enter the contents of replenishment in Reagent Replenishment Record.
NOTE: • If you replenish lyse before error message "No Reagent" appears,
execute "4: Replace Lyse" on the Select Menu screen.
To Next Page
Loading...
