QUALITY CONTROL
Sysmex KX-21 Operator’s Manual -- Revised October 1998 5-17
When you press [SELECT] key before setting the 2nd QC data, the QC Cancel
Confirmation message appears.
OK to cancel? Yes No
Figure 5-2-23: QC Cancel Confirmation Message
Using [
] key or [ ] key, move the cursor to select "Yes" or "No."
[Yes]: Rejects analysis result, exists from the QC program, and returns to the Analysis
screen.
[No]: Returns to the QC Analysis screen and allows continuous QC analysis.
Press [ENTER] key to execute the selected process.
To Next Page
Loading...
