SYSMEX KX-21 - Page 16

vi Sysmex KX-21 Operator’s Manual -- Revised January 2000
APPENDIX A: INSTALLATION
1. INTRODUCTION................................................................ A-1
2. CHECK BEFORE INSTALLATION ......................................... A-2
3. INSTALLATION SPACE....................................................... A-3
4. REMOVE SHIPPING CLAMPS............................................... A-4
5. CONNECT TUBE................................................................ A-6
5.1 Prepare Reagent............................................................ A-6
5.2 Connect CELLPACK ..................................................... A-6
5.3 Connect STROMATOLYSER-WH..................................... A-8
5.4 Connect Waste Line....................................................... A-9
6. SET PRINTER PAPER.........................................................A-10
7. CONNECT POWER CORD...................................................A-12
8. TURN POWER ON.............................................................A-12
APPENDIX B: TECHNICAL INFORMATION
1. OUTPUT FORMAT FOR HOST COMPUTER (Option)...................B-1
1.1 Hardware.....................................................................B-1
1.2 Software......................................................................B-3
INDEX