TROUBLESHOOTING
Sysmex KX-21 Operator’s Manual -- Revised October 1998 7-31
Error Message Meaning of Message
"No Printer Paper"
No Printer Paper
ERR CODE:XXXXX.X.X
1:Print 2:Paper Feed 3:Stop Output
*
Help
*
Restarting to print
3 Stop printing on built-in printer
To make built-in printer on-line,
press[SELECT], then
[Periph. Settings]
[1]
[3]
Paper found empty
Cause 1) No printer paper in the built-in printer
Action
1) Replace Print Paper
Refer to
Chapter 4, Section 8.3: Replace Printer Paper
. After
replacing, press [1] key to print the data that has not yet printed.
2) Make the Built-in Printer Off-line
When you press [3], the built-in printer is made off-line. The main
unit becomes Ready but cannot print. When you want to try
printing, refer to
Chapter 10: INSTRUMENT SETUP
and make
settings for connecting the built-in printer.
Analysis after error
occurrence
Not Ready until the error is resolved.
NOTE: • When you press [2] key, paper is fed.
To Next Page
Loading...
