TROUBLESHOOTING
7-32 Sysmex KX-21 Operator’s Manual -- Revised October 1998
Error Message Meaning of Message
"Printer Error"
ERR CODE:XXXXX.X.X
*
Help
*
Error on Built-in Printer
Press the paper guide lever down.
Restarting to print
Stop printing on built-in printer
To make built-in printer on-line,
press[SELECT],then
[Periph. Settings]
1:Print 2:Paper Feed 3:Stop Output
[1]
[3]
The built in printer has an error.
Cause 1) The paper release lever is not in the secured position.
Action
1) Confirming the Printer
Press the paper release lever down. Pressing [1] key resumes
printing.
2) Make the Printer Off-line
When [3] key is pressed, the built-in printer is made off-line. The
main unit becomes Ready but cannot print. When you want to try
printing, refer to
Chapter 10: INSTRUMENT SETUP
and make
settings for connecting the built-in printer.
Analysis after error
occurrence
Not Ready until the error is resolved.
NOTE: • When you press [2] key, paper is fed.
To Next Page
Loading...
