INTRODUCTION
1-8 Sysmex KX-21 Operator’s Manual -- Revised October 1998
8.2 Status Display Messages
The KX-21 displays instrument status message on the LCD screen.
This section gives the meanings of status messages displayed on the LCD screen.
Display Message Meaning
Sysmex KX-21
[00-01]
Please wait.
The instrument is making self-check. When
the power is turned ON, the instrument
checks itself automatically. When the power
is turned ON, [00-01] appears briefly in the
right lower corner, which indicates the version
of the unit control program.
*Auto Rinse*
Please wait.
The hydraulic system is undergoing Auto
Rinse. When the power is turned ON, the
instrument starts self-check and motor check,
followed by auto rinse of the hydraulic
system. Auto rinse is also performed when
"5: Auto Rinse" in the Select menu is
executed and when [SHUTDOWN] key is
pressed. When an automatic background
check shows a background count exceeding
the permissible background count level, rinse
sequence is automatically extended.
To Next Page
Loading...
