SYSMEX KX-21 - Page 280

INSTRUMENT SETUP
Sysmex KX-21 Operator’s Manual -- Revised October 1998 10-27
10. FACTORY SETTINGS
The settings made at the factory are listed below:
• System Settings
Units Type 2
Language English
Parameter Naming LYM%
RDW RDW-SD
• Date/Time
Date Format dd/mm/yy
• Patient Limits LL UL
WBC 3.0 15.0
RBC 2.50 5.50
HGB 8.0 17.0
HCT 26.0 50.0
MCV 86.0 110.0
MCH 26.0 38.0
MCHC 31.0 37.0
PLT 50 400
W-SCR 5.0 55.0
W-MCR 1.0 20.0
W-LCR 45.0 95.0
W-SCC 0.0 0.0
W-MCC 0.0 0.0
W-LCC 0.0 0.0
RDW-SD 37.0 54.0
RDW-CV 11.0 16.0
PDW 9.0 17.0
MPV 9.0 13.0
P-LCR 13.0 43.0
• QC Settings
QC Method
X
Data Output Print
• Printer Settings
Built-in Printer Use
Print Condition All Data
Print Format Type 1
• Host Settings
Host Output Not use
Output format K-1000
Auto Output Off
Baud Rate 2400 bps
Data Length 7 bits
Stop Bit 2 bits
Parity Check Even
Protocol Class A
Interval 2
RTS/CTS Ignore
Sysmex KX-21 Operator’s Manual -- Revised January 2000