SAMPLE ANALYSIS
2-4 Sysmex KX-21 Operator’s Manual -- Revised October 1998
• We recommend preparing "Reagent Replenishment Record" in which to enter date
of replenishment, name of reagent, reagent lot No., expiration date, name of person
who replenished. Such record would come handy.
2 . Inspection of the instrument
Inspect the connection of tubings and cords to see that there are no broken tubes and
the power cord is properly plugged in the outlet.
3 . Inspection of waste
If waste is found to have collected in the trap chamber on the left side of the unit and
the waste tank (when provided), discard the waste.
4 . Inspection of printer paper
Open the front cover and check if printer paper needed for processing the samples for
the day is available.
Figure 2-2-1: Inspection of Printer Paper
CAUTION: • Use the printer paper specified b
S
smex. Avoid usin
print paper
that has its end fixed to the core. Such paper can cause failure.
Sysmex KX-21 Operator’s Manual -- Revised January 2000
To Next Page
Loading...
