SYSMEX KX-21 - Page 41

SAMPLE ANALYSIS
Sysmex KX-21 Operator’s Manual -- Revised October 1998 2-5
2.2 Turning ON the Power and Self-Check
Turn ON the power switch on the right side of the unit. Self-check, auto rinse, and
background check will be automatically performed, and the "Ready" (ready for analysis) will
appear.
1. Turn ON the power switch
(1) The initial display appears on the LCD screen. The program version (Example: [00-
01]) appears at the right lower area of the screen.
Sysmex KX-21
[00-01]
Figure 2-2-2: Initial Display
(2) Next, the instrument makes self-check of motor operation, scheduled maintenance
items, etc. The LCD screen displays "Please wait." during this period.
Please wait.
Figure 2-2-3: LCD Screen during Self-check