sysmik Scalibur SCA-340 - User Manual

sysmik Scalibur SCA-340

58 pages

Save Page as PDF

To Next Page

To Next Page

Loading...

Rev.22

Scalibur – Modular Controllers

SCA-340 / SCA-340-L

Manual

Table of Contents

Questions and Answers

A
Anthony WeberAug 11, 2025
Why is my sysmik Scalibur SCA-340 Platform Daemon not starting?
- L
  Laura KingAug 12, 2025
  The Platform Daemon might not be starting because the Daemon HTTP Port is doubly used or the RTC date is in an invalid range. Check with the SCA System Shell or the Commissioning Website that no other software component is using the Daemon HTTP Port. The default ports are standard 3011 and secure 5011. If the RTC date is in an invalid range, set the date with the SCA System Shell to a valid value.
V
victoria19Aug 19, 2025
What to do if I forgot my sysmik Scalibur SCA-340 Niagara Platform Access Credentials?
- J
  Jennifer FischerSep 12, 2025
  If you've lost your access credentials, you can reset them to the default values: user_sysmik / password_intesa, by using the Service button.
N
Noah CannonAug 26, 2025
How to fix sysmik Controller SCA System Shell / Commissioning Website if it is not accessible?
- L
  Lauren FreemanAug 26, 2025
  Verify that the cable is not damaged and is properly plugged into both sockets. Also, check if the Device Manager shows the device Remote NDIS Compatible Device is shown as Network adapter. If not, re-install the device driver.
D
David GreenSep 3, 2025
What to do if my sysmik Controller Sedona Virtual Machine is not Starting?
- D
  Dr. Darren HigginsSep 3, 2025
  The Scalibur Sedona files (app.sab and kits.scode) might be corrupted or inconsistent. Overwrite these files with default files using the Service button.

sysmik Scalibur SCA-340 Specifications

General

Model	SCA-340
Category	Controller
Power Supply	24 V DC
Operating Temperature	0 to +50 °C
Protection Class	IP20
Product Name	Scalibur
Communication Interface	Ethernet
Protocols	Modbus TCP
Manufacturer	sysmik GmbH Dresden