Software
28 sysmik.de Manual SCA-340 / SCA-340-L
4. Software
Note: Scalibur factory defaults
Ethernet eth0 – LAN3 / LAN4: 192.168.1.1 / subnet mask 255.255.255.0
eth1 – LAN1 / LAN2: disabled
Platform-Credentials: sysmik / intesa
Sedona-Credentials: admin / no password (after Sedona activation)
Fig. 9.1: Login
4.1 Configuration Tools
Fundamental device settings are vital to the device operation and should be
protected carefully. To prevent unwanted accesses from the network while offering a
stable configuration access, which is independent of the current IP settings, the
Scalibur offers a local access via USB-OTG (see chapter 3.2.5).
The connected PC is getting another virtual network adapter, which is connected to
the Scalibur and is automatically receiving IP settings from the Scalibur DHCP
server. The IP address of the Scalibur is 172.16.0.10 in this virtual network.
To Next Page
Loading...