sysmik Scalibur SCA-340 - Connections; Connectors

Installation and Commissioning
14 sysmik.de Manual SCA-340 / SCA-340-L
3.2 Connections
3.2.1 Connectors
1
Micro-SD card slot
8
Switches for RS-485 termination / bias
2
Type label with device-specific
information
9
Service interface
3
Service button
10
Bus interface connector
4
Ethernet (4x 10/100BaseT)
11
Supply connector
5
FE connector *)
12
Labeling field (2x)
6
USB 1 (mini USB, USB-OTG)
13
Diagnostic indicators
7
USB 2
14
End plate
*) … The FE connector is placed at the rear side of the connector – it is not visible in the
sketch.
Fig. 3.2.1.1: Overview device connections