sysmik Scalibur SCA-340 - Page 34

Software
34 sysmik.de Manual SCA-340 / SCA-340-L
LAN1
eth1
LAN2
LAN3
eth0
LAN4
Fig. 4.3.1.3: LAN3/4 on eth0, LAN1/2 on eth1 (factory default)
LAN1
eth1
LAN2
LAN3
LAN4
eth0
Fig. 4.3.1.4: LAN4 on eth0, LAN1/2/3 on eth1
If an IP interface has more than one Ethernet port assigned to it, the IP interface is
accessible on each of these ports. Also, Ethernet traffic is forwarded between these
ports, so that several devices can be linked in a line-topology (see Fig. 4.3.1.5).
Between Ethernet ports that do belong to different IP interfaces there is no Ethernet
traffic (i.e. these ports are completely separated at Ethernet level).
Fig. 4.3.1.5: Example of Ethernet wiring