sysmik Scalibur SCA-340 - Page 52

Technical Data
52 sysmik.de Manual SCA-340 / SCA-340-L
Environmental conditions
Operating temperature
-25 °C to 55 °C (32 °F to 122 °F)
Storage
temperature
max.
-25 °C to 85 °C (-4 °F to 158 °F)
recommended
-25 °C to 35 °C (-4 °F to 95 °F)
Rel. humidity
0 % to 75 %, non condensing
Protection standard
IP20
EMC conformity
Immunity according EN 61000-6-2 (industrial)
IEC 61000-4-2 (ESD)
6 kV contact discharge
8 kV air discharge
criterion A
IEC 61000-4-3 (immunity field) 10 V/m
criterion A
IEC 61000-4-4 (burst) 2.0 kV
criterion A
IEC 61000-4-5 (Surge)
Supply DC (symmetrical/asymmetrical) 0,5 kV
ETH (asymmetrical) 1,0 kV
RS 485 (symmetrical/asymmetrical)
LON (symmetrical/asymmetrical) 0,5 kV
criterion B
criterion A
criterion A
criterion A
IEC 61000-4-6 (conducted immunity) 10 V/m
criterion A
Emission according EN 61000-6-3 (residential, commercial and light-industrial)
EN 55022 (conducted)
passed
EN 55016-2-3 (radiated)
passed
1) Functional isolation! The isolation is bridged by an RC filter for EMC reasons. Safety agency hazardous
voltage barrier requirements are not supported!
2) Functional isolation! The isolation is bridged by a 300 V varistor for protection of the device. Safety agency
hazardous voltage barrier requirements are not supported!
3) The data retention time of the Flash memory depends on the temperature. Longer storage periods (weeks) at
higher temperatures should be avoided.
Table 6.1: Technical data