EC900 Series Operation Manual V4.7
The factory configuration password is 1234. Be sure to make a note should you want to
change the password.
Should the password be lost then the password 1111 will always gain entry.
ALHLD Should the instrument be configured with alarms and automatic calibration then with this
function the alarms can be suppressed for the duration of the autocal and for a further five
minutes until the process settles down to equilibrium.
To turn the feature on change the code from 0 to 1. Factory configuration is 0 (off).
ANHLD Should the instrument be configured with analogue outputs and automatic calibration then
with this function the analogue outputs can be suppressed for the duration of the autocal and
for a further five minutes until the process settles down to equilibrium.
To turn the feature on change the code from 0 to 1. Factory configuration is 0 (off).
To Next Page
Loading...