Systech Instruments EC900 series - 2 Introduction

EC900 Series Operation Manual V4.7
www.systechillinois.com
Page
3
2.0 INTRODUCTION
The EC900 Series of instruments may be supplied in three types of cabinet/housing and may use any
one of four measuring cells, suitable for different applications.
The instrument may also be fitted with other customer specified options.
Please refer to Table 1 below, for the configuration code and an explanation of the instrument
numbering system.
When particular attention should be given in this manual to a particular configuration the paragraph
will be preceded with a configuration specification i.e.
EC91x
=
Panel/Bench mounting
EC92x
=
Wall mounting
EC9x1
=
Trace analysis
Series EC900 Oxygen Analyzers
Cabinet - Mounting
EC9
Panel or bench mounting
1
Wall mounting IP66
2
Rack mounting (*Note 1)
3
Cell type / range
% analysis
0
Trace analysis
1
Ultra low trace analysis
2
RACE
3
Configuration code =
EC9
x
x
Table 1 Configuration codes
* Note: 1 A rack mounting case is 19" wide, 4U high. This provides a housing suitable for 1 or 2
analyzers.