System One S Series - To Add or Change Automatic Recycle Schedules

Recycling solvent can occur at any time of the day and any day of the week. An automatic schedule can
be created to recycle solvent on alternating days, weekdays only, weekends only, individual days, or any
number of different combinations. Up to 18 different schedules can be programmed in the timer.
You will see the following default schedule:
 lower left corner of the display should show program number 1
 clock should read 22:00
 upper left corner of the display should show M-W-F
Changing the default schedule
Press the Program button (1)
As applicable:
Press the Day button (3)
Press the Hour button (5)
Press the Minute button (7)
Press the Clock program button (4)
Adding a new schedule
Press the Program button (1) until you arrive at a
blank schedule
As applicable:
Press the Day button (3)
Press the Hour button (5)
Press the Minute button (7)
Press the Clock program button (4)
Deleting a schedule
Press the Program button (1)
Press the Program Clear button (6)
Clearing the current time and all
programmed settings
Press the Master Reset button (2)
7
To Add or Change Automatic Recycle Schedules (Figure 5)