System Sensor P2RLED-B - User Manual

I56-0022-000
INSTALLATION AND MAINTENANCE INSTRUCTIONS
ENGLISH
L-Series with LED
Indoor Selectable-Output
Horn Strobes and Strobes
3825 Ohio Avenue, St. Charles, Illinois 60174
800/736-7672, FAX: 630/377-6495
www.systemsensor.com
LED L-series Indoor Horn Strobes and Strobes — P/N I56-0022-000 8/25/2023 1
Manual is for use with the following models:
Horn Strobes
Standard Wall Mount Horn Strobes: P2RLED, P2RLED-B, P2WLED, P2WLED-B, P2RLED-P, P2WLED-P, P2RLED-SP, P2WLED-SP
Compact Wall Mount Horn Strobes: P2GRLED, P2GRLED-B, P2GWLED, P2GWLED-B
Standard Ceiling Mount Horn Strobes: PC2RLED, PC2RLED-B, PC2WLED, PC2WLED-B
2-Wire Strobes
Standard Wall Mount Strobes: SRLED, SRLED-B, SWLED, SWLED-B, SRLED-P, SWLED-P, SRLED-SP, SWLED-CLR-ALERT, SWLED-ALERT*
Compact Wall Mount Strobes: SGRLED, SGRLED-B, SGWLED, SGWLED-B
Ceiling Mount Strobes: SCRLED, SCRLED-B, SCWLED, SCWLED-B, SCWLED-CLR-ALERT, SCRLED-P, SCWLED-P
Language designators: “-B” are bilingual (English/French). “-P” are plain versions (no wording). “-SP” are marked “FUEGO”
*Amber lenses are for use in UL applications.
Table of Contents
Section 1: Introduction .................................................................................................................................................. 2
1.1 Product Specifications .......................................................................................................................................................2
1.2 Dimensions and Mounting Options ...................................................................................................................................2
1.3 Before Installing ................................................................................................................................................................2
1.4 General Description ..........................................................................................................................................................2
1.5 Fire Alarm System Considerations ....................................................................................................................................3
1.6 System Design ..................................................................................................................................................................3
Section 2: Configurations for Notification Appliances ............................................................................................... 4
2.1 Available Tones .................................................................................................................................................................4
2.2 Available Candela Settings ...............................................................................................................................................4
2.3 Current Draw and Audibility ratings ...................................................................................................................................5
Section 3: Installation .................................................................................................................................................... 7
3.1 Wiring and Mounting .........................................................................................................................................................7
3.2 Wiring Diagrams ................................................................................................................................................................7
3.3 Install Back Box .................................................................................................................................................................7
3.4 Install Mounting Plate and Appliance ................................................................................................................................7
3.5 Remove a Ceiling Model Appliance ..................................................................................................................................8
3.5.1 Mounting Drawings ........................................................................................................................................................8
3.6 Tamper Screw .................................................................................................................................................................10
3.7 Test Points ......................................................................................................................................................................10

System Sensor P2RLED-B Specifications

General

Power Supply	12-24 VDC
Temperature Range	32°F to 120°F (0°C to 49°C)
Humidity Range	10% to 93% RH, non-condensing
Color	Red
Flash Rate	1 Hz
Mounting	Wall

Summary

Introduction

Product Specifications

Details electrical and physical specifications for the L-Series horn strobes and strobes.

Dimensions and Mounting Options

Provides physical dimensions and mounting compatibility for wall and ceiling models.

Before Installing

Guidance on pre-installation checks and adherence to relevant codes and standards.

General Description

Overview of L-Series notification appliances, features, and intended applications.

Fire Alarm System Considerations

Key considerations for integrating notification appliances into fire alarm systems.

System Design

Guidance on designing fire alarm systems considering current draw and voltage drop.

Configurations for Notification Appliances

Available Tones

Lists and describes the selectable horn tones and volume settings available.

Available Candela Settings

Details the selectable strobe candela settings and their corresponding light output.

Current Draw and Audibility Ratings

Provides current draw and sound output data for various settings and models.

Installation

Wiring and Mounting Guidelines

Instructions for proper wiring and physical mounting of the notification appliances.

Wiring Diagrams

Illustrates the electrical connections required for system wiring.

Back Box Installation

Steps for installing the required junction or back boxes for mounting.

Mounting Plate and Appliance Installation

Procedure for attaching the mounting plate and securing the appliance.

Remove Ceiling Model Appliance

Instructions for safely removing a ceiling-mounted notification appliance.

Mounting Drawings

Illustrative diagrams for various mounting configurations and device types.

Tamper Screw Installation

Details on using a tamper-resistant screw for added security.

Test Points

Information on using diagnostic test points for voltage measurement.