System76 Thelio - Page 27

Removing a 2.5” Drive
Removing a 2.5” is simple. A cross-head (Phillips) screwdriver may be
helpful.

Tools required: Fingers or Cross-head (Phillips) screwdriver.
Time estimate: 5 minutes.
Difficulty: Easy
Screws: 8 total
- 4 Thumbscrews (Phillips/Crosshead) in the Top Case.
- 4 Thumbscrews (Phillips/Crosshead) per Drive.
Before you remove the lid, be sure to power off and unplug all
cords from the computer.
If you would like to remove the drive, gently pull on the drive and slide it
out from the drive cage.
Installing a 2.5” Drive
Removing a 2.5” is simple. A cross-head (Phillips) screwdriver may be
helpful.

Tools required: Fingers or Cross-head (Phillips) screwdriver.
Time estimate: 5 minutes.
Difficulty: Easy
Screws: 4 total
- 4 Thumbscrews (Phillips/Crosshead) in the Top Case
- 4 Thumbscrews (Phillips/Crosshead) per Drive.
System76 Thelio (thelio-b1)
27