SystemAir K EC - Declaration of Conformity

23
Doument in original language
GB
Declaration of Conformity
Manufacturer
Systemair Sverige AB
Industrivägen 3
SE-73930 Skinnskatteberg SWEDEN
Office: +46 222 440 00 Fax: +46 222 440 99
www.systemair.com
hereby confirms that the following products:
Duct fans with circular connection: K 100-315L EC, KVO 100-315 EC, KD 315-500 EC
Duct fans with rectangular connection: RS 30-15–100-50 EC, RSI 60-35–100-50 EC
Insulated duct fans with circular connection: KVKE 125-315 EC
Roof fans with circular or square connection: TFSR /TFSK 160-200 EC
Thermo fans: KBT 160-250 EC
(The declaration applies only to product in the condition it was delivered in and installed in the facility in
accordance with the included installation instructions. The insurance does not cover components that are added
or actions carried out subsequently on the product)
Comply with all applicable requirements in the following directives
 Machinery Directive 2006/42/EC
 Low Voltage Directive 2014/35/EU
 EMC Directive 2014/30/EU
• Ecodesign Directive 2009/125/EC
327/2011 Requirements for fans above 125W
1253/2014 Requirements for ventilation units above 30W
1254/2014 Requirements for energy labeling of residential
ventilation units
The following harmonized standards are applied in applicable parts:
EN ISO 12100:2010 Safety of machinery – General principles for design – Risk assessment and risk reduction
EN 13857 Safety of machinery – Safety distances to prevent hazard zones being reached by upper or
lower limbs
EN 60 335-1 Household and similar electrical appliances – Safety Part 1: General requirements
EN 60 335-2-80 Household and similar electrical appliances – Safety – Part 2-80: Particular requirements
for fans
EN 62233 Measurement methods for electromagnetic fields of household appliances and similar
apparatus with regard to human exposure
EN 50 106:2007 Safety of household and similar appliances – Particular rules for routine tests referring to
appliances under the scope of EN 60 335-1 and EN 60967
EN 60529 Degrees of protection provided by enclosure (IP Code).
EN 60 204-1 Safety of machinery – Electrical equipment of machines – Part 1: General requirements
EN 60730-1 Automatic electrical controls for household and similar use - Part 1: General requirements
EN 61000-6-2 Electromagnetic compatibility (EMC) – Part 6-2: Generic standards – Immunity for industrial
environments
EN 61000-6-3 Electromagnetic compatibility (EMC) – Part 6-3: Generic standards – Emission standards
for residential, commercial and light-industrial environments
Skinnskattberg 15-03-2016
Mats Sándor
Technical Director