GB
Installation |
15
8 Installation
8.1 Safety information
Danger: Risk that MUB/F does not work in case of fire.
♦ Use installation material with fire resistance classes that meet temperature requirements.
Warning: Danger from falling fan or fan parts.
♦ Check the surface before installation for load bearing capacity.
♦ Consider all static and dynamic loads when selecting hoisting equipment and fastening components.
General safety information
♦ Installation may only be carried out by adequately qualified persons, details see Table 1 Qualifications, page 6.
♦ Wear protective equipment during all work in the vicinity of the fan, details see 2.2 Personal protective equipment,
page 6.
♦ Abide by the system-related conditions and requirements of the system manufacturer or plant constructor.
♦ Do not dismantle or circumvent safety elements, or put them out of function.
♦ Move the rotor of the fan by hand before you install it in order to check that it moves freely.
♦ Provide contact and intake protection and ensure safety distances according to DIN EN ISO13857 and DIN 24167-1.
♦ Prevent the possibility of foreign bodies being drawn in.
♦ Use vibration dampers to prevent vibration transmissions. For example, article #37324 in our accessory range.
♦ To reduce transmission of vibration to the duct system, we recommend flexible connections from our accessory
range, see chapter Accessories.
8.2 Preconditions
♦ Ensure that the fan and all its components are undamaged.
♦ Ensure that the information on the name plates (fan and motor) matches up with the operating conditions.
♦ Ensure that there is enough space to install the fan.
♦ Protect against dust and moisture when installing.
♦ Fit the fans in such a way that there is sufficient access for troubleshooting, maintenance and repair.
Important
Overheating motor
♦ Multiple fans: See the
adjacent image for minimum
distances between fans (2 x
A).
| 001
To Next Page
Loading...
Need help?
General
