SystemAir NaviPad

No communication
|
11
Example 4 Available devices (AHU)
The device (AHU) will appear, press the button to select the device to pair it with the NaviPad. If there are several devi-
ces (AHUs) at the same IP subnet, a list of available devices will be presented.
Example 5 Restore NaviPad factory settings
You will be requested to confirm your action.
All settings including password will be reset and Start-Up wizard will run again.
5 No communication
If the above symbol are shown the communication to the selected device (AHU) is lost. One reason could be that the IP
number has changed. Go back to available devices (figure 4) and first deactivate all the devices and then activate them
again.
151671 | A002