EasyManuals Logo
Home>SystemAir>Fan>SAVE VSR 300

SystemAir SAVE VSR 300 Installation Instructions

SystemAir SAVE VSR 300
18 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #6 background imageLoading...
Page #6 background image
2
| Technical Data
The system should operate continuously, and only be stopped for maintenance/service.
Do not connect tumble dryers to the ventilation system.
Make sure that filters are mounted before starting the unit.
2.2 Admonitions
Danger
Make sure that the mains supply to the unit is disconnected before performing any maintenance or
electrical work!
All electrical connections and maintenance work must be carried out by an authorized installer and in
accordance with local rules and regulations.
Warning
This product is not intended to be used by children or people with reduced physical or mental ability or
lack of experience and knowledge, if no instruction concerning the use has been given by the person
responsible for their safety or that this person is supervising the operation. Children should be supervised
so that they can not play with the product.
Beware of sharp edges during mounting and maintenance. Use protective gloves.
Warning
Risk of injury due to rotating parts that have not come to a complete standstill after mains supply to the
unit have been disconnected.
3 Technical Data
Model
VSR300 VSR500
Re-heater
1670 W
Fans 166 W 338 W
Total power consumption
1836 W 2008 W
Fuse 10 A 13 A
Voltage 230V 1~, 50Hz
333547 | v1.1

Other manuals for SystemAir SAVE VSR 300

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the SystemAir SAVE VSR 300 and is the answer not in the manual?

SystemAir SAVE VSR 300 Specifications

General IconGeneral
BrandSystemAir
ModelSAVE VSR 300
CategoryFan
LanguageEnglish

Related product manuals