SystemAir SysAer SR55 - Page 47

English
45SysAer
Main menu Q0
Item
Screen code
Parameter Unit Min Fact. Max Description / Note
INPUTS / OUTPUTS
Enthalpy
I6
Room kJ/kg If the room humidity sensor is connected Outdoor kJ/kg If the outdoor temperature and humidity sensors are connected
I7 Setpoint kJ/kg Calculated from the temperature and humidity setpoints
Digital inputs
I8 Inputs 1 …12 -
Digital inputs status
I9
Input 13-14 I/O expansion
-
Digital outputs
Ia
Compressor 1 OFF/ON
Digital outputs status
Compressor 1B OFF/ON Compressor 2 OFF/ON Compressor 2B OFF/ON
Ib
Electrical Heater 1 OFF/ON (option) Electrical Heater 2 OFF/ON (option)
Ic
Reversing valve 1 OFF/ON Circuit 1 Reversing valve 2 OFF/ON Circuit2 Condenser(s) fan(s) 1 OFF/ON Circuit 1, if the fan(s) are not driven by Inverter Condenser(s) fan(s) 2 OFF/ON Circuit2, if the fan(s) are not driven by Inverter
Id
Main fan OFF/ON Exhaust/return blower OFF/ON (option) Heat recovery pump OFF/ON (option) Burner control OFF/ON (option)
Analogue outputs
Ie
Economizer/3 dampers
% (V) (option) - Real opening (Analogue output)
Hot water coil valve % (option) Gas burner capacity % (V) (option) - Real capacity (Analogue output)
Ig
Condenser(s) fan(s) 1 % Fan(s) speed, circuit 1, if Inverter Condenser(s) fan(s) 2 % Fan(s) speed, circuit 2, if Inverter
Modem status Ih Available if GSM or RS232 selected in screen Pv