Need help?Do you have a question about the SystemAir VH07 and is the answer not in the manual?
General| Type | Axial fan |
|---|---|
| Airflow | 700 m³/h |
| Diameter | 200 mm |
| Voltage | 230 V |
| Frequency | 50 Hz |
| Weight | 3.5 kg |
Follow safety rules in force when working on the appliance. Personnel must be qualified.
Cut off power supply before work. Ensure no impurities in pipe work. Check pipe compatibility.
Maintain warranty by using qualified technicians, approved parts, and following manual procedures.
Details maximum operating pressure, temperatures for water pipes and premises air.
Lists current and power absorbed by standard motors for different unit sizes and speeds.
Specifies capacity in Watts for electric heating resistances across different unit sizes.
Refers to appendix for unit dimensions, indicating overall size parameters.
Proper lifting techniques and net weight information for unit handling and installation.
Specifies minimum clearances needed around the unit for maintenance and access.
Guidelines for selecting unit location and detailed steps for mounting and leveling the unit.
Defines the unit's operating face and details coil water connections for 2-pipe and 4-pipe systems.
Lists the water volume in liters for cooling and heating for different unit sizes and pipe configurations.
Instructions for connecting the condensate drain, including siphon requirements and checks.
Specifies recommended water quality parameters to prevent corrosion and scaling in the unit.
Details the required duct connection sizes for different unit models for air intake and outlet.
Provides information on wiring diagrams, voltage requirements, and power supply specifications.
Outlines the steps and precautions for performing electrical installations by qualified personnel.
Discusses regulation equipment and thermostat location, ensuring proper temperature control.
Details the operation and safety precautions for electric heating resistances.
A comprehensive checklist covering electrical, hydraulic, visual, and ducting checks before initial start-up.
Instructions for operating the unit using Aquanet or Aquasimp control systems.
Details the use, switches, and basic dimensions of the TRM-FA room thermostat.
Guidance on connecting the TRM-FA thermostat and mounting it on the wall.
Lists operating voltage, temperature range, switching current, and sensor system of the TRM-FA.
Step-by-step guide for adjusting the temperature range and setting the thermostat.
Describes the applications for regulating ambient temperature and controlling heating/cooling modes.
Explains the unit's composition, controls, and terminal connections.
Details the operating mode, DIP switches, and setting limiters for the TAE20 thermostat.
Checklist for verifying fan wheel rotation, filter installation, connections, and noise levels.
Instructions for fixing cables, explaining functions to the user, and filter maintenance.
Guidelines for routine maintenance, general inspection, and checking condensate evacuation.
Procedures for changing or cleaning the air filter to prevent clogging.
Instructions for cleaning the condensate tray and coils to ensure proper operation.
Maintenance checks for the fan motor assembly and electrical section, including earthing.
Annual checks for scale formation in water pipes and de-scaling if required.
A checklist for casing, condensate drain pan, coils, and electrical equipment during servicing.
Steps for returning faulty material under warranty, requiring prior authorization.
Information required when ordering service or spare parts, including unit serial numbers.
To Next Page