SystemAir Villavent Combini EC - Manufacturer and Compliance; EC Declaration of Conformity; Harmonized Standards

_________________________________________________________________________________________________________
Combini EC Installation description
206803 (02-12-2009) 3 Systemair AB
Manufacturer
Our products are manufactured in compliance with
applicable international standards and regulations.
Systemair AB
Industrivägen 3
SE-739 30
Skinnskatteberg
SWEDEN
Office: +46 222 440 00
Fax: +46 222 440 99
The manufacturer hereby confirms that the following
products:
Air handling units
Combini EC
Comply with the following EC-directives:
EC Declaration of Conformity
as defined by the EC Machinery Directive
98/37/EC, Annex II A, fans for ventilation in air
handling systems with air from non-explosion
hazardous premises.
The following harmonized standards are in use:
SS-EN ISO 12100-1:2003.
Safety of machinery; basic concepts, general
principles for design.
SS EN ISO 14121-1:2007
Safety of machinery - Risk assessment
EN 60 034-1 Rotating electric machinery; ratings and
performances.
EN 60 204-1:2007
Safety of machinery; electrical equipment of
machines; general requirements.
EN 294
Safety of machinery; safety distances to prevent
danger zones reached by the upper limbs.
Remark: EN 294 only complies when fitted contact
safety device is part of the extent of delivery.
EC Declaration of Conformity
as defined by the EC Low Voltage Directive
2006/95/EC
The following harmonized standards are in use:
EN 60 335-1
Electric domestic products and similar – safety-
general requirements.
EN 60 335-2-40
Safety of household and similar electrical appliances -
Part 2-40: Particular requirements for electrical heat
pumps, air-conditioners and dehumidifiers.
EN 50 366:2003+A1
Electric domestic products and similar everyday
articles-Electromagnetic fields-Methods for evaluation
and measurements
EN 50 106:2007 Electric domestic products and
similar-Safety-Instructions for control of manufacture.
EC Declaration of Conformity
as defined by EC’s EMC-directive 2004/108/EC
The following harmonized standards are in use:
EN 61000-6-3: Electromagnetic compatibility - Generic
immunity-Emission –Part 1: General requirements for
equipment in homes, offices, shops and similar
environments.
EN 61000-6-2 Electromagnetic compatibility (EMC) –
Part 6-2: General requirements – Immunity for
appliances in industrial environments.
EN 61000-3-2/3: EMC Harmonics
Complete technical documentation is available.
Skinnskatteberg, 25-09-2009
Mats Sándor
Technical Manager