SYSTEMS Poweramp PowerStop M - Page 37

35
4111-0014 — Apr. 2020
© 2020 Systems, LLC
Item Quantity Part Number Description
1 1 0192-0161 Bracket, Stop M, Release Bar
2 1 0195-0052 Stop, Debris Guard Assembly
3 1 0941-0018 Spring, Compression, 1.937” DIA X 7.402”LG,. 138 Wire
4 1 0941-0021 Spring, Extension, SS, 0.45” DIA X 1.76” LG 0.059 Wire DIA
5 1 0961-0538 Prox SW, Flat, NO, 20-250VAC
6 1 0961-0614 Prox Switch, RIG Sensor
7 1 1431-0239 Connector, Tubing, 1/2”, Metal
8 1 1751-0135 Decal - Warning
9 1 1751-0444 Decal - Poweramp/PowerStop
10 1 1751-0735 Decal, Made In The USA
11 1 1751-1290 Decal, Serial Number
12 2 2101-0032 Screw, SHSS,1/4”-20 UNC X 3/8”
13 1 2101-0089 Screw, HHCS, 3/8”-16 x 2.00”, Grade 2, Zinc Plated
14 3 2101-0151 Nylon Lock Nut, 10-24 UNC
15 2 2101-0156 Washer, Lock #8, Regular Split.
16 8 2101-0189 E-Ring, 1/2”
17 2 2101-0228 Screw, FSHCS, 1/2”-13 UNC x 1.00”
18 1 2101-0335 Screw, Shoulder, 1/2” x 3/8”, Zinc Plated
19 2 2101-0336 Washer, Tag Hole, 1/2”, Stainless Steel
20 2 2101-0349 Retaining Ring, External, Zinc Plated
21 2 2101-0376 Screw, RHMS, Torx, #4-40 x 7/8”
22 3 2101-0377 Screw, THMS, Torx, #10-24 x 2.00”
23 2 3051-0388 Screw, PHMS, #6-32 UNC x 5/8”
24 1 2753-0004 J-Box Assembly, 2-Lead, 26.5”, (Not required on units with manual lights.)
25 3 3051-0001 Cable Tie
26 2 9202-0042 Pivot Pin, Long, 0.499” DIA X 4.25” LG
27 2 9202-0043 Pivot Pin, Short, 0.499” DIA X 3.00” LG
28 1 9411-0091 Release Lever Wand
29 1 9411-0103 Pin, RIG Sensor Bar
30 1 9411-0104 Connection, RIG Sensor Bar
31 1 9411-0105 RIG Sensor Bar
32 1 9411-0107 Spacer, RIG Sensor Bar
33 2 9412-0161 Tube, 1-1/4” OD x 9/16” ID x 0.594”
34 1 9412-0289 Conduit, 1/4”, Split Flex, 35” LG
35 1 9413-0062 Scissor Lift Assembly
36 1 9413-0068 Spacer Assembly, 1-1/8” OD x 11/16” ID x 2.56”
37 1 9413-0121 Lip Deector
38 1 9413-0122 Stop, Release lever Assembly
39
1 9413-0123 Hook Weldment, Tall Prole (Standard)
1 9413-0127 Hook Weldment, Low Prole (Optional, not shown)
40 1
9414-0083 Base Weldment, 27 (Standard)
9414-0084 Base Weldment, 24” (Optional, not shown)
PARTS