t.a.c. I/A MicroNet MN-S Series - User Manual

Printed in U.S.A. 8-06 © Copyright 2006 TAC All Rights Reserved. F-26277-7
TAC
1354 Clifford Avenue
P. O. Box 2940
Loves Park, IL 61132-2940
www.tac.com
Application
TAC I/A Series MicroNet Sensors are wall-mounted
digital temperature and humidity sensors for use with
TAC I/A Series MicroNet Controllers. These sensors
feature Sensor Link (S-Link) communication protocol
that provides a simple two wire interface for power and
exchange of sensor and subbase information.
Available in twelve models, these TAC I/A Series
MicroNet Sensors provide integral analog to digital
conversion for elimination of electrical interference
between sensor and controller. An optional wiring
connection allows access to the TAC MicroNet
L
ONWORKS
®
network (LON
®
) via a LONWORKS network
jack on the left side of each sensor. This jack allows
direct connection to a PC running WorkPlace Tech Tool
(WP Tech) or a third party Network Management Tool.
Each sensor also provides an S-Link jack on the right
side for connecting to a PDA running Pocket TAC I/A
software.
TAC I/A Series MicroNet Sensors are suitable for
direct-wall, 2 x 4 electrical box, 1/4 DIN electrical box,
or surface box mounting.
Model Chart
See Table-1 on page 2 for a chart of the models.
MN-Sx, MN-SxHT,
MN-S4-FCS,
and MN-S4HT-FCS
TAC I/A Series
®
MicroNet
™
Sensors
General Instructions
MN-S1
MN-S1HT
MN-S3
MN-S3HT
MN-S4-FCS
MN-S4HT-FCS
MN-S4
MN-S4HT
MN-S2
MN-S2HT
MN-S5
MN-S5HT

t.a.c. I/A MicroNet MN-S Series Specifications

General

Brand	t.a.c.
Model	I/A MicroNet MN-S Series
Category	Temperature Controller
Language	English

Summary

Application

Model Chart

Installation

Inspection

Inspect carton and sensors for damage upon receipt.

Requirements

Lists items required for installation, including tools and accessories.

Precautions

General and static precautions to follow during installation.

Location

Environmental and Placement Precautions

Guidance on avoiding moisture, fumes, vibration, and electrical noise, and proper placement.

Mounting

Mounting Dimensions and Types

Details mounting dimensions for direct-wall, 2x4, and 1/4 DIN electrical boxes.

Direct-wall Mount

2 x 4 Electrical Box Mount

1;4 DIN Electrical Box Mount

Surface Box Mount

Wiring

Sensor Link (S-Link) Wiring

Details S-Link wiring requirements, capacitance, and connection steps.

TAC MicroNet LONWORKS Network (LON) Wiring

Wiring Checkout

Electronic Assembly and Cover Installation

Features

Sensor Operation Diagnostics

Accessing Diagnostics

Instructions on how to view and adjust diagnostic data like errors and offsets.

Display Screen Functions

Emergency Heat Functions

Fan Functions

General Functions

Mode Functions

Override Functions

Setpoint Functions

Wink Mode

LCD Icon Descriptions

Service and Troubleshooting