T-Rex BIG FOOT User Manual

10
How to program BIG FOOT (continued)
Choose the expression inlet you wish to change from linear to logarithmic.
Press the MENU-button to choose the submenu. The display now reads “LINEAR” in the right side. Use the
><-buttons to change the type from “LINEAR” to “LOG”
End the session by choosing QUIT in the submenu and subsequently choosing QUIT in the main menu.
How to program the toggle switches
BIG FOOT contains 6 toggle switches.
They can all be used to control functions like tap delay, mute, boost and effects on/off etc. in your effects unit.
Every switch is assignable to whichever control number that is required by your effects unit.
The default setting is control numbers 20 thru 25.
BIG FOOT also allows for programming the position of the toggle switches so you e.g. won’t have to press
twice to turn off an effects block.
Main menu
Naming <
>
Select ch <
>
Expression <
>
Pedal type <
>
Toggle sw <
>
Copy <
>
Quit
Sub menu 2
Control Nr <
>
Position <
>
Midi Active <
>
Loop Mode <
>
Quit
Sub menu 3
Individual <
>
Global <
>
Quit
ex. 4

T-Rex BIG FOOT Specifications

General

Brand	T-Rex
Model	BIG FOOT
Category	Recording Equipment
Language	English